How to get water out of iPhone 11 Pro speaker?

Nowadays it is very common to come across iphone with water damage caused by poor storage. If you’ve recently faced this problem, don’t panic! You can easily fix it by following the few simple steps stated in this article.

First, make sure that the iPhone is completely dry. If it is not, use a clean and dry cloth to remove the moisture. You should also remove the power adapter and the phone’s charging cable. Disconnect the speaker and the headphone jack If the water seeps into the phone’s speakers, it will cause serious damage.

There are two ways you can get the water out. The first is to take your phone to an authorized service center. They will clean the speaker and replace it. The second option is to do it yourself. It doesn’t sound like fun but it’s not that hard. Here’s how to do it. First, you need to remove the protective film covering the speaker.

If the film is stuck, you need to gently clean it off using the same cloth that you used to dry the phone. When you are done, put the protective film back on the speaker. You can now use a small screwdriver to remove the screws that hold the speaker to the phone’s frame.

Once the screws are out, pick up the speaker and take it out.

Using a screwdriver, carefully remove the protective caps

How to get water out of iPhone pro water damage?

If you got your phone wet in the washing machine, you may have noticed water is dripping through the speaker, especially when it vibrates. This is because the water is trapped inside the speaker, causing it to overheat. To resolve this issue, turn the phone off. Take off the back cover and locate the speaker.

Look for a small hole at the bottom of the speaker or at the location where the moisture is dripping out. If you can’t see this hole, use a cotton Firstly, back up all your photos and videos to your computer or cloud storage to prevent data loss in case your iPhone gets water damage.

Since your iPhone is prone to water damage because of its waterproof design, it is always better to have a backup in case your iPhone gets water damage. If you are using iCloud, the backup will be done automatically. If you got your phone wet in the washing machine, the best way to dry it out is to use a clean dry towel.

Put the iPhone in the towel and turn it on. The drying process will start immediately. If the water is not absorbed in the towel, remove the back cover and use a small hair dryer to dry it out.

If you can access the headphone port, plug in the headphone to get the dryer to work on the inside of the phone.

To avoid the possibility

How to get water out of iPhone pro water damaged?

If the water damaged the internal components of your iPhone 11 pro speaker, then there is no way to fix it without taking it to an authorized service provider. The cost of repairing an iPhone 11 pro speaker may vary based on whether the specific part needs to be replaced or not.

On the other hand, if the water damage is only on the outside of the iPhone 11 pro speaker, there are a few options you can try. There are different methods that you can use in order to get water out of your iPhone pro speaker. First, you can use a damaged phone as a paperweight. Place your phone on a piece of paper and press down firmly on it.

Doing this for about 5 minutes should be enough to get the water out of the speaker. If the water still remains, you can use a vacuum cleaner to get it out. You will have to cut a hole on the phone’s back cover. Using You can also use a vacuum cleaner to get water out of the speaker.

Using a vacuum cleaner to get water out of an iPhone 11 pro speaker is much easier than trying to do it manually. Just cut a hole on the back of the phone’s cover and then use a vacuum cleaner to remove the water. However, you will have to turn off the device before doing this.

You will also need to use a vacuum cleaner with a powerful suction.

Otherwise, the water might get sucked

How to get water out of iPhone pro without opening?

If your iPhone is water damaged and you don’t want the water to get inside, there are some measures you can take to clean the speaker as quickly as possible. First, turn your iPhone off and unplug it. If you have a USB cable, you can connect it to a USB wall charger or another computer to drain the water.

If you don’t have the USB cable, use your headphone jack to connect the phone to your computer. Your iPhone will drain the water automatically If you are unable to remove water without opening your phone, you can remove the rear camera, volume button, or home button to access the Home screen.

The Home screen is where you access all the pre-installed apps on your iPhone. You can also remove the screen from the phone to access the Home screen. However, if you do this, your iPhone will not be covered under warranty. Remember that when you take apart your iPhone, you void your warranty.

If you are unable to remove the water inside your iPhone, you can use a small piece of tape to cover the speaker. If the tape is not thick enough, the water can pass through it. You can also use a toothpick to stick into the hole, but be careful not to damage the speaker.

How to get water out of Apple iPhone Pro speaker?

Even though the design of the new iPhone 11 Pro speaker looks good, it’s still very susceptible to water damage. The reason being, it is not entirely waterproof. The speaker does come with water resistance but it still needs to be treated with care.

If you drop your iPhone 11 Pro in water or accidentally submerge it in water, take immediate action to get the water out. If you don’t remove the water immediately, it will start to cause damage to the phone. It There are various ways to get rid of water from iPhone 11 pro speaker.

However, as there is no official method of getting water out of the speaker, so the methods mentioned here are just the methods that I have found online and have worked for me. There are many ways to the same task but each method has pros and cons. And, you can choose the one that works for you. Before you try any of the methods listed here, make sure you understand the pros and cons of these methods First, try drying the speaker.

There are many ways of drying your iPhone 11 pro speaker. You can use towels, ear buds, or your phone itself to dry it. However, the method that works best is placing the phone on a drying machine for a few minutes.

Using the drying machine will remove moisture from the phone gradually. If you are not able to dry the phone using a drying machine, try placing it somewhere to dry naturally.

However, do not leave it somewhere in direct sunlight as