How many feet deep is the Ohio River?

Depending on the location of your boat in the water, the river could be anywhere from 6-20 feet deep. However, the Ohio River is mighty deep, especially when you look at the section of the river that goes through Kentucky and West Virginia.

In the area of Kentucky, the river is around 13-17 feet deep, and in West Virginia, you can expect to find the river between 11-14 feet deep. The Ohio River is 6,463.9 feet wide at Louisville, KY and 6,352 feet wide at Portsmouth, VA. The river is the shortest major U.S. river, with only two dams impeding the water flow.

The two dams are the Millersburg Dam (Kentucky) and the Harsha Dams (Ohio), which are each 328 feet long and were built in the early 1900s. The dam on the Kentucky side is part of a hydroelectric project that The minimum width of the river is 6,463.9 feet at Louisville, Kentucky and 6,352 feet at Portsmouth, Virginia.

The maximum width is 6,705 feet at Moccasin Bend, West Virginia and 6,712 feet at Cairo, Illinois. The average width is 6,673 feet.

How many feet deep is the Ohio River bank?

If you want to build a river bank, you’ll need to do some research. The U.S. Geological Survey says that the average river bank is between 15 and 30 feet deep. However, the depth of water that the river covers varies depending on location.

At Louisville, the river is between three and 11 feet deep, while at Cincinnati, it varies between 42 and 80 feet deep. The bank of the Ohio is between 4,460 and 4,636 feet deep from the mouth to the Falls. Between the river's two branches, the bank is 4,602 feet deep.

The difference between the two banks' average depths is only about 30 feet. The average water level is 854 feet above sea level, which means the river is between 4,606 and 4,656 feet deep from the river's mouth to the Falls. The bank of the Ohio varies between 4,460 and 4,636 feet deep from the river’s mouth to the Falls.

The difference between the two banks’ average depths is only about 30 feet. The average water level is 854 feet above sea level, which means the river is between 4,606 and 4,656 feet deep from the river’s mouth to the Falls.

How deep is the Ohio River at Louisville?

The average depth of the Ohio River at Louisville is about 35 feet. The river reaches its maximum depth here at 35.3 feet. If you want to view the river at its deepest, head to the Riverview at Riverview Park. If you want to get an idea of the river’s average depth, you can visit the River Docks near Crescent Hill in south Louisville.

The average depth of the Ohio River at Louisville is 43 feet. There are two locations where the river has been measured at 43 feet or deeper: Louisville Downtown and the West Louisville Dam. The first 43-foot reading was taken by a steamboat in 1827, and the West Louisville Dam was first constructed in 1876.

A good way to find the average river depth at Louisville is to visit the River Docks in Crescent Hill. At the Docks, the average depth is 43 feet. This is equal to the highest reading recorded at the West Louisville Dam.

If you want to see the river at its deepest, you can visit the River Docks near Crescent Hill. The river reaches its maximum depth here at 43.3 feet.

How many feet is the Ohio River in Ohio?

The average depth of the Ohio River in Ohio is about 35 feet. The river is deeper in the northern part of the state, with some locations reaching as much as 65 feet. The river is relatively shallow in the western part of the state, often just breaking the surface. The average elevation of the Ohio River is around 471 feet.

That means the river covers an average of 2,207 feet from the river’s source to the Gulf of Mexico. The river’s average width at any given point is just under 1,500 feet. The Ohio River is about 300 miles long, so the river is about five miles wide on average.

By covering an average of 2,207 feet from the river’s source to the Gulf of Mexico, the Ohio River is the second longest river in the United States. Only the Mississippi River is longer. The average depth of the river in Ohio is about 35 feet, meaning the river’s average width is about two miles.

How many feet is the Ohio River in Kentucky?

If you’re planning to boat or fish on the Ohio River, get a good reading on the river’s depth in Kentucky at any location you plan to travel. While the river’s average depth is 30 feet, it does fluctuate between 20 feet in some areas to over 40 feet in others. The river’s depth varies along its length as well.

The Ohio River is about 1,765 miles long, stretching from the area around Pittsburgh, Pennsylvania, all the way to the Gulf of Mexico. The river flows through the states of Ohio, West Virginia, Kentucky, Indiana, Illinois, Tennessee, Missouri, and Arkansas.

The maximum recorded depth of the Ohio River in Kentucky is 42.35 feet at a location in Lawrenceburg. The river’s average depth is 30 feet. The river was named the “longest, widest, deepest river in the world” by National Geographic.