How deep is the Ohio River in feet?

The river is about 2,849 feet (866 meters) long, although the width varies from approximately 11 feet in some sections to 30 feet in others. The width of the river at Pittsburgh is about 25 feet. The river's name is derived from the Iroquois word "Ouasi-tah" which means "good river" or "beautiful river.

" The average depth of the Ohio River is 1,567 feet, but the river can vary between 1,099 feet in low areas to 1,877 feet at places. The deepest section of the river runs through the middle of Ohio between the cities of Portsmouth and dayton reaching a maximum of 1,942 feet.

The river’s shallowest section is between Cincinnati and McHenry, where it only drops to 1,099 feet. The Ohio River is about 1,570 feet deep at Cincinnati, making it the deepest river in the U.S. east of the Mississippi. The river’s maximum depth between Portsmouth and Dayton is 1,942 feet.

The river’s average depth is 1,567 feet.

The river has five sections, each with its own average depth: 1,098 feet between Cincinnati and McHenry, 1,599 feet between McHenry and Portsmouth, 1539 between Portsmouth and Dayton,

How deep is the Ohio river at Tennessee?

The river is about 654 feet deep at the Muscle Shoals dam in Tennessee, which is about 40 miles southwest of Memphis. That’s about as deep as the river gets at any location along the Mississippi.

At its closest point, the river is approximately 20 feet below the surface at the northern end of Muscle Shoals, Alabama, while it is about 11 feet deep when it reaches Florence, Kentucky, the southern end of Muscle Shoals. At Louisville, Kentucky, the river is approximately 27 feet deep; at Cincinnati, approximately 43 feet deep.

The Ohio river is about 654 feet deep at the Muscle Shoals dam in Tennessee, which is about 40 miles southwest of Memphis. That’s about as deep as the river gets at any location along the Mississippi.

At its closest point, the river is approximately 20 feet below the surface at the northern end of Muscle Shoals, Alabama, while it is about 11 feet deep when it reaches Florence, Kentucky, the southern end of Muscle Shoals.

At Louisville, Kentucky, the river is approximately 27 feet

How deep is the Ohio river in Kentucky?

The average of the low water mark is in Louisville. The average of the high water mark is in Cincinnati. The National Weather Service says that the river is in its natural channel. The river is at Louisville's riverfront, at Cincinnati's riverfront, and at Cincinnati/Northern Kentucky International Airport.

The average depth of the Ohio river in Kentucky is 65 feet, while the greatest recorded depth is about 693 feet – which is almost the same as the length of a football field! This river has several sections where the water is deep enough to allow for riverboat travel; the minimum depth for a boat to travel on the river is 22 feet.

The average water level of the Ohio river in Kentucky is 65 feet deep. The maximum recorded depth is 693 feet. There are several sections of the river in Kentucky that are deep enough to allow for riverboat travel. The minimum depth for a boat to travel on the river is 22 feet.

How deep is the Ohio river at Indiana?

The uppermost reaches of the Ohio River, where it splits into the Allegheny and Monongahela rivers, is deep. The lower reaches, where it flows into the Mississippi River, is deep. The river is still deep at Louisville, though it has been reduced in recent years due to the completion of dams and locks.

The official river depth at Indiana is 27 feet. However, some areas of the river are deeper. The average depth of the river is approximately 35 feet at Lock 11, which is the river’s first lock and dam just north of Evansville, Ind., on the way downriver towards Kentucky.

The river is approximately 25 feet deep at Mile 27, just north of Louisville, Ky. The average river depth at Indiana is 27 feet, but some spots are deeper. The river is 25 feet deep at Mile 27, just north of Louisville, Ky., and approximately 35 feet deep at Lock 11, which is the river’s first lock and dam just north of Evansville, Ind.

, on the way downriver towards Kentucky.

How deep is the Ohio river at Kentucky?

The average depth of the Ohio river at Kentucky is 43 feet. A whopping 43 feet! The river is about 12 to 15 feet deeper in the northern part of the state and in the Midwest region. The river is much shallower in the southern portion of the state.

The river is about 688 feet deep at the Kentucky line, which is a major reason for the power of Kentucky’s hydroelectric dams, which can harness the force of the river’s water to generate electricity. There are many towns along the river, and although the water level does fluctuate, the river is one of the most traveled waterways in the U.S.

The average depth of the Ohio river at Kentucky is 43 feet. A whopping 43 feet! The river is about 12 to 15 feet deeper in the northern part of the state and in the Midwest region. The river is much shallower in the southern portion of the state.

The river is about 688 feet deep at the Kentucky line, which is a major reason for the power of Kentucky’s hydroelectric dams, which can harness the force of the river’s water to generate electricity.

There are